Easy Step to Make Your Rusted Driveway Gate Look New Again

A huge difference to a property can be brought about by a wrought iron driveway gate. Besides offering a huge amount of security and privacy, the gate also makes the establishment look more attractive and stylish. Based on the usage, design and size of the property, the owner can choose to install the automatic driveway gates. But, the driveway gates need regular maintenance to resist harsh climate and weather.

More often, the driveway gates are impacted by rust, and red flakes or orange after being constantly exposed to moisture. Refinishing the driveway gates make3s them look stylish and fresh. However, before applying the glossy and premier black paint to bring back the lost looks of the gates, ensure that the rust stains are completely removed. The following are simple steps to refinish rusted driveway gates:

Removal of the rust

You have to remove the rust before finishing the rusted gates. Rust can be removed by scrubbing the gate using a steel brush. But, you have to apply heavy force to rub the rust fro0m the metal thoroughly.

Always make the surface smooth

Prior starting the paint job, the surface should be smooth. You always have to create a smooth surface to apply the paint and primer. Rub the gate thoroughly using 80 -grit sandpaper or a steel scouring to make the surface smooth. Always start by rubbing the sandpaper or pad between the railings of the gate, and in to the tight crevices.

The sandpaper or pad has to be run over the entire gate to prepare the surface for the paint job. After you have rubbed the gate with the sandpaper or pad, wipe this using a rag to remove the loosened rust.

Remove the rust residue

It is now time to remove the remaining rust using smaller abrasive pads or steel wool. You have to observe the gate thoroughly to identify the area that needs scrubbing before using the pads. It is advisable to start rubbing the pad in to the crevices and corners of the gate. And once the rust is removed, use a towel to remove the rust residue from the gate surface.

Application of the primer

Make the paint job durable by using any of the quality alkyd base primer paints available in the market. The alkyd primer paints are considered to be the most effective for priming iron gates in comparison to conventional primers.

Painting of the gate

When the primer dries, apply a coat of exterior metal paint on the iron driveway gate Los Angeles. To give the metal paint a much smoother finishing, consider using a spray. Remember to allow the first coat of paint to dry. Once it dries, look at the paint job to decide if the gate needs a second coat.

When you are applying the paint, ensure that the hard to reach spots are not missed out to prevent the rust from coming back.