DIY roofing is a challenging task for most. In this
process, you need to do the tasks that professionals have been doing for all of
their lives. While it can be intimidating at first, it is a job that you can
accomplish on your own with the help of how-to guides and the needed materials.
If you are thinking of undertaking a DIY roofing Croydon job, then here are the
things you need to know about this tricky yet fulfilling project.
Prepare the Area
Prior to embarking on a DIY
roofing task, you need to prepare the area to make sure that is organized and
clean. Identify potential problem areas in the site, such as power lines,
dangerous access areas, and other hazards.
Remove the wall hangings and
loose items; place tarps on plants and shrubs as well as pools and hot tubs to
avoid damages. Disable the sprinklers and place your automobiles away from the
project area.
Tear the roof and prepare the roof deck
This is essential to remove
the old materials so you can see any problems that might lie underneath the
desk.
Install protection for the roof deck
Roof deck protection is
important as serves as the best foundation for your roofing Croydon project.
Install a leak barrier
Leak barriers are necessary
in order to protect your roof from the elements of nature.
Install starter strip shingles
Starter strip shingles are
important as they play a big role in wind resistance. They serve as the first
line of defense against wind uplift on roof edges.
Nail shingles properly
Under-driven and angled
nailing are some of the common causes of roofing problems such as blistering,
blow-offs and premature failure. Force, angle, length, location and nail type
should be taken into consideration with your DIY roofing Croydon project.
Install the shingles
Shingles should be installed
properly as they can protect your roof and add aesthetic value to your home.
Install Valleys
The valleys are areas where
leaks commonly occur so you need to be precise and careful in installing these
parts by yourself.
Install Flashing
Water seepage usually
happens in areas where surfaces intersect. To prevent this, you need to install
flashing, especially for the critical areas on the roof.
Install Ridge Vents
Moist and hot air in your
roof can damage the furniture and other possessions located in your attic. The
amount of ventilation depends on the area so you need to go over the
ventilation requirements in your area. The ridge vents need to be installed at
the highest part of the roof so you need to be careful as you install these
vents on the roof.
Installing Ridge Cap Shingles
Ridge caps protect the
vulnerable and stressed areas of the roof. This is also installed on the
highest parts of the roof so safety precautions should be taken.
Clean up the Job Site
If you have placed tarps
over shrubs, plants, hot tubs or swimming pools, cleaning up the job site will
be easy to do. Run the ‘drop zones’ with magnets in order to obtain the nails
that might have dropped off during your DIY roofing Croydon task.
Great post on shingles and tiles.
ReplyDelete-Keystone Contracting Corp.
Roofing Contractor Bronx